House of Calculator

Convert miles to kilometres in one step. Type a value, change the units if you need a different pair, and the answer updates as you type, with the reverse rate and a quick reference list.

Results are estimates for planning. Check the figures before you make a financial or health decision.

How to convert miles to kilometres

Multiply the number of mi by 1.609344 to get km:

km = mi × 1.609344

To go the other way, divide by 1.609344 (or multiply by 0.621371). The converter stores each unit as a multiple of a base unit, so you can also pick any other pair of units from the same group.

Worked example

Using the default values in the converter above:

InputValue
Value26.2
FromMiles
ToKilometres

26.2 miles equals 42.164813 kilometres

Miles to KM reference table

MilesKilometres
1 mi1.609344 km
2 mi3.218688 km
5 mi8.04672 km
10 mi16.09344 km
20 mi32.18688 km
50 mi80.4672 km
100 mi160.9344 km
500 mi804.672 km
1,000 mi1,609.344 km

Tips and common mistakes

The inch, foot, yard and mile are defined exactly in metric terms: 1 inch is 25.4 mm, 1 foot is 0.3048 m and 1 mile is 1.609344 km. The factors used here are therefore exact, and any rounding comes only from the number of digits shown.

The most common mistake is treating the part after the decimal point of a foot as inches. 5.5 ft means five and a half feet, which is 5 ft 6 in, not 5 ft 5 in. Check that you are reading a decimal and not a feet-and-inches pair.

For quick mental maths, remember that an inch is about 2.5 cm, a foot is about 30 cm, a metre is a little over 3 ft 3 in, and a mile is about 1.6 km.

Frequently asked questions

How many kilometres are in 1 mi?

1 mi equals 1.609344 kilometres.

How do I convert mi to km by hand?

Multiply the mi figure by 1.609344. For example, 26.2 mi × 1.609344 = 42.164813 km.

How do I convert km back to mi?

Divide the km figure by 1.609344, or multiply it by 0.621371. For example, 42.164813 km is 26.2 mi.

Is this conversion exact?

The inch, foot, yard and mile are defined exactly in metric terms, so the factor is exact. Any difference comes only from rounding.

Related calculators